Glove Manufacturer's Advice: 3 Ways to Reduce Minimum Order Quantity

\"no_moq\"A glove buyer\’s job is tough.

You watch retail trends, and develop new items to satisfy customer demand. But, forecasting a new item is hard.

If you could, you’d start small. Perhaps even fly in a small quantity to test, to gain confidence for a bigger follow-up order. 

Your gut tells you there are larger quantities to come, but until you see what sells, how can you be sure? There’s no crystal ball — so to manage risk, you try to keep quantities small.

Problem is, the manufacturing world isn\’t geared for \”small\”. That’s why you run into the MOQ issue.

Here\’s how to work around it.more

How To Reduce Minimum Order Quantity?

When it comes to glove manufacturing, there are 3 main reasons you run into MOQ issues: Raw material and component supplier minimums, upfront production charges, and manufacturing efficiency concerns at the factory level.

There’s a workaround for each:

1. Raw Materials:

Suppliers of leather, cloth, webbing and the like would rather sell a gazillion yards than a hundred. They get to be more efficient this way, and it reduces the unit cost they can quote. But that won\’t work for your new item.

What’s the workaround?

Next time you need a smaller quantity, instead of asking “What’s the minimum?”, ask: “What does it take to get x yards?”. Change the conversation about minimums to one about process and possibilities.

Perhaps one of their other customers is already using the color or material you need. Or vat charges and other set-up charges exist, but they may not break the bank.

Start your conversation with a different question, and you may end up with a different answer.

2. Up-Front Production Charges:

There are also fixed setup charges (cost of cutting dies, etc.) before your glove makes it to the production line.

The workaround?

Find a glove supplier who is willing to be transparent about costs. If you can have a conversation about pre-production vs. ongoing costs, you should be able to find a way to get your project rolling. For instance, perhaps you can absorb the start-up costs, or amortize them across future production. 

Another benefit to separating out pre-production costs: You will know the real glove cost, and have a better starting point for ordering 2,000 vs. 200 pair for the next season, without cost being inflated by up-front charges.

(Pre-production costs include the up charge for a low volume material buy, the cost of making prototypes, cutting dies or patterns, branding set up for embroidery or print, etc. As a general rule of thumb, you can normally use a multiplier of 1.5 over production costs to cover pre-production up charges – but talk to your supplier — every situation is different).

3. Glove Factory Efficiency Concerns

“Start-stop, start-stop” is a manufacturing efficiency killer.  With a smaller order, after a few days of production, your order is finished before efficiency is achieved!  Some factories can work that way, others won\’t.

Let\’s use the beer category as an analogy.

There are basically two kinds of glove manufacturers: “Budweisers” that thrive on economies of scale, “Craft Breweries” … and hybrids that have qualities of each.  Each has a different business model.

You might choose one or the other for different reasons.

Two Types of Glove Manufacturers: “Budweiser vs. Craft Brewery” Types

\"\"Budweiser\"The “Mega” Glove Supplier:

This type of glove contractor may already make your leading styles. They are efficient, and quality is good.  When the time comes for a new style, they are the obvious place to start.

If they are willing and able to accomodate your smaller volume item, you have the most negotiating power here. Depending on your relationship, you may not even have to reimburse up-front costs.

But sometimes, a big glove contractor isn’t well-suited to your new style or line. Perhaps it involves a new process. Or they just aren’t able to accommodate your smaller order due to other volume commitments.

In that case, a “craft brewery”-like glove factory is a good option.

\"\"craft

The “Craft-Brewery” Type of Glove Factory:

Unlike the mega glove contractor, this type of glove manufacturer is more focused on product quality and service than high volumes and low margins.

This manufacturer has a variety of efficiency tricks up their sleeve, that helps them to be more flexible and nimble.

To accommodate smaller quantities, they can …

  • combine your raw material or component order with several other customers, for increased clout;
  • ask their supply chain partners for special favors on your behalf;
  • use excess materials and components from other customers or your order;
  • juggle their factory production schedule, to accommodate your smaller run;
  • combine your order with others to lower shipping costs, and optimize export logistics.

Additional MOQ Tips

Here are few final MOQ tips. See if you can:

  • look ahead, and use history to forecast demand. Perhaps you can agree to the MOQ but take delivery in parts, spaced over few months. 
  • minimize the number of unique components or colors selected in the design phase … or plan to use materials across several product categories, for economies of scale.

While MOQ is a very real issue that cannot simply be negotiated away, you CAN turn the conversation on its head (excuse the final beer reference!) and find a creative solution.

Try out these suggestions and let us know how they work out!

P. S. Fresh Advice From Glove Manufacturers …

Are you looking to have a transparent conversation about up-front costs, and strategies you can use to lower minimum order quantity and get your new glove project moving?

Click below for a consultation with our glove experts.

Peter Kiernan

Peter Kiernan

I am a fourth generation glove and leather professional from Gloversville NY. I have 36 years of passion in all aspects of glove design, manufacturing and sales. My experience provides an extensive comprehension of how the glove product links from innovation and design through point of sale.
My recent association with Olympia Sports Company is focussed on technical and luxury glove products.

Linkedin Profile

Visit Our Online Shop

On the Road Since 1941.
At Olympia gloves, we’re proud of our past … after nearly 82 years, who wouldn’t be? But we’re not resting on our laurels. We’re focused on building the future!
Online Shop
Facebook-f Youtube

Recent Posts

Subscribe to Our Email List to Get the Best Articles & Some of Your Favorite Promotions!

Elevate Your Ride to the Next Level!

Why be average when you can be extraordinary? Get VIP access to exclusive sales and game-changing glove tech. Don’t miss out!